Ok, so i just sold one of my temprite units so have some cash to spend.
I need a few things for my AG setup to improve my technique.
Options are -
1. blow all the cash on a CFWC.
2. buy a refractometer and a digi thermometer.
3. buy/build a stand to brew on rather than the outdoor setting.
Any thoughts?
Cheers
DrSmurto
What to spend my money on first?
Digi thermo i am eyeing off is this one - Link
I want the one with 0.2 C accuracy.
Other option is a plate chiller......
I want the one with 0.2 C accuracy.
Other option is a plate chiller......
dr s i picked a similar one up from a kitchen supply store a wile back $15- only 1 deg accuracy but the best part is the built in alarm. if the temp rises up 3 degrees or drops 3, an alarm sounds, i put down my beer for a second and then adjust the burner.
i also have one with the display on the end of the probe .1 degree. i only bring that out if i want to be anal waste my time and have hot sticky fingers
i also have one with the display on the end of the probe .1 degree. i only bring that out if i want to be anal waste my time and have hot sticky fingers
beer-o-beer
OI!
None of that shite in my thread....
So i played around with the figures to try and best spend my cash. Ended up going a little over what i got for my temprite but i have ordered a plate chiller, hop filter for the kettle and a refractometer. I have a few mercury thermos that i dunk into the mash and sparge water etc so will make do with that for now. They are more accurate than most digi thermos anyway.
Money left my account 24 hours after it arrived! Not a bad effort.
Had to take Lethals advice and upgrade to a refract - the hydrometer is 10 years old now and due for some long service leave. Will also make testing SG of my beers in the 5L demi johns which up until now i havent bothered with grav readings will put the digi thermo on my xmas wish list.
Did i mention the chiller and hop filter are shiny stainless steel?
Cheers
DrSmurto
None of that shite in my thread....
So i played around with the figures to try and best spend my cash. Ended up going a little over what i got for my temprite but i have ordered a plate chiller, hop filter for the kettle and a refractometer. I have a few mercury thermos that i dunk into the mash and sparge water etc so will make do with that for now. They are more accurate than most digi thermos anyway.
Money left my account 24 hours after it arrived! Not a bad effort.
Had to take Lethals advice and upgrade to a refract - the hydrometer is 10 years old now and due for some long service leave. Will also make testing SG of my beers in the 5L demi johns which up until now i havent bothered with grav readings will put the digi thermo on my xmas wish list.
Did i mention the chiller and hop filter are shiny stainless steel?
Cheers
DrSmurto
Why do you need to filter hops? All my hops end up on the bottom with trub after a whirlpool...
Refractomoter is ok but bit of a PITA converting brix to OG's...guess it will go alright when you learn all the conversion. Well aware that hydro's waster more beer but only if you dont drink it
I would of gone for the stand - im sick of brewing on the outdoor setting / decking too. Everything else other than the stand will come later.(im assuming you have a mash tun, kettle, hlt and good burner).
Plus refracs and digi therm's you can ask for birthdays/fathersday/xmas pressies, people generally wont make a stand for you for a pressie tho. just my 2c.
Refractomoter is ok but bit of a PITA converting brix to OG's...guess it will go alright when you learn all the conversion. Well aware that hydro's waster more beer but only if you dont drink it
I would of gone for the stand - im sick of brewing on the outdoor setting / decking too. Everything else other than the stand will come later.(im assuming you have a mash tun, kettle, hlt and good burner).
Plus refracs and digi therm's you can ask for birthdays/fathersday/xmas pressies, people generally wont make a stand for you for a pressie tho. just my 2c.
How hard is it to convert brix, just x4 mate, if your reading is 4 brix then it is 1.016 on the hydro, pretty simple heyFents wrote:Why do you need to filter hops? All my hops end up on the bottom with trub after a whirlpool...
Refractomoter is ok but bit of a PITA converting brix to OG's...guess it will go alright when you learn all the conversion. Well aware that hydro's waster more beer but only if you dont drink it
I would of gone for the stand - im sick of brewing on the outdoor setting / decking too. Everything else other than the stand will come later.(im assuming you have a mash tun, kettle, hlt and good burner).
Plus refracs and digi therm's you can ask for birthdays/fathersday/xmas pressies, people generally wont make a stand for you for a pressie tho. just my 2c.
Cheers
Leigh
Leigh
Most of the hops stay in the bottom of the kettle but cleaning a plate chiller is harder than a CFWC. Being more anal about making sure 4/5ths fo FA gets into the chiller helps with maintenance.
Having a chiller was just too high on my list of priorities. Yes, i always drank the hydro samples but i have 5L glass demi johns so taking gravity readings just got a lot easier!
I agree with the stand - am starting to see a bow in the outdoor setting which my partner hasnt noticed yet. Wont be long before we need ti use it for its designed purpose and then i will have to resort to crates and the top of fridges!
Cheers
DrSmurto
Having a chiller was just too high on my list of priorities. Yes, i always drank the hydro samples but i have 5L glass demi johns so taking gravity readings just got a lot easier!
I agree with the stand - am starting to see a bow in the outdoor setting which my partner hasnt noticed yet. Wont be long before we need ti use it for its designed purpose and then i will have to resort to crates and the top of fridges!
Cheers
DrSmurto