Hey Guys,
Just curious who is using this stuff for their Kilkenny/Guiness clones?
Is it usable for normal beers too?
Are you using a foamer tap or can you use it with a pluto gun if you don't go wide open on the trigger?
Also, where did you get it from. Both BOC & AirLiquide only have the big F size 22kg bottles.
Cheers
Ash
Cellarmix.....
hello, i use aligal 15, i use it with my 20 litre system, on all beers, the result is a finer head and finer bubbles in yr beer, at times i wonder why particularly as it takes so long to carbonate the keg (6 days minimum) as opposed to straight co2 which can be done in 24 hours or less. i was curious and going through a real stout phase, (winter where im from is bloody cold) so i gave it a go, i use an f class cylinder at all times as im lazy and dont want to be caught short. does it make a difference? a little. co2 is just as good. ive found that blasting the co2 at 200 kpa for roughly 18 hours does the same job and serving temp also seems to make a difference, currently my beer fridge is off and it hardly needs any nudge to get the beer out and the head is fluffier than usual. beer is funny and i love playing with the various aspects of it. sorry if this isnt helpful.
...and the serpent said nothing, just grinned with knowledge.
sorry, forgot to say, i use a gun to disperse and i fully suppress the trigger at around 30 kpa if cold and even less at cellar temp. if u only press a little on the trigger it flattens the beer as the bubbles lose their integrity, but if u do both techniques with co2 u get a similiar feel to a nitro mix gas, regards heathen
...and the serpent said nothing, just grinned with knowledge.